USB and AUX ports within the Arm rest | The Focus ST Network Forum

USB and AUX ports within the Arm rest

Discussion in 'Focus ST Interior Upgrades' started by graham prescott, Jan 9, 2015.

  1. graham prescott

    graham prescott New Member

    Hi All

    A very specialist question for anyone who can help?

    I have bought an aftermarket headunit for my 2013 ST and wish to ultilize the factory fitted USB and AUX ports.

    My new headunit has rear USB and AUX and these are just cables so was hoping there may be a way of hard wiring into the original USB and AUX looms. My only issue is I have no idea which ones they will be.

    Can anyone help with the pin allocation from these wiring looms?

    If not does anyone have a good step by step guide to removing the arm rest so that i can run a new cable to the same point?
     
  2. Steve@Tasca

    [email protected] Team Focus ST Sponsor

    Looks like the harness contains everything, you might be able to splice into it if you have wiring skills, all you have to do is find the wires coming off the sockets.

    [​IMG]

    This is how the console breaks down,

    [​IMG]
     
  3. graham prescott

    graham prescott New Member

    wow, many thanks for this!

    it turns out the kit i have does route the AUX just not the USB So i will still need to look at this. but from your pictures it looks like there are two cables.

    i wonder if i could just run the USB to the arm rest then unplug existing USB and replace with mine. I guess that will depend on the type of plug. ideally i dont want to ruin the car.

    thanks again for finding this!
     
  4. Steve@Tasca

    [email protected] Team Focus ST Sponsor

    Glad to help.
     

Share This Page